1. Home
  2. Find an Installer
  3. New York
  4. Syracuse

Syracuse, New York

Permanent Christmas Lights in Syracuse, NY — Installed Once, Never a January Ladder

The kit price, the installer's name, and the warranty word for word — before you hand anyone your phone number.

I'm Devan. I hung Christmas lights for a living before I ever sold a product, and the part nobody warns you about is the takedown. In Syracuse that takedown happens in the snow: a normal December brings more than 30 inches of it and January about 34, and the sun sets at 4:32 in the afternoon on December 1. Pulling lights off cold fascia on a ladder in that is the half of the job that makes people quit. So this page shows you the kit price, names the installer, and quotes the warranty exactly.

The short answers

Who installs it in Syracuse?
First Due Home Services — Dan, based in Clay, NY. More about Dan.
What does it cost?
The kit is public: 100 ft $1,299, 150 ft $1,762.50, 200 ft $2,399, 300 ft $3,499 (live from my store, September 12, 2026). Labor is quoted by the installer after measuring — why I don't quote it.
Can I just buy it and do it myself?
Yes. Nothing to apply for, no approval to wait on, and the kits are built to go up. Plenty of buyers do it for a living, but plenty don't. In Syracuse I'd point you to Dan first. 100 ft kit.
What's the warranty?
Quoted word for word below — the 30-Day Perfect Peak Guarantee, the 5-Year Product Warranty, and the First-order money-back on your first 100 ft kit.

What it costs in Syracuse — kit prices, pulled live

These are the same numbers on my product pages, read from the store when this page was built (September 12, 2026). Nobody else on the first page of Google prints a price; I'd rather you have the number before you give anyone your phone number.

Kit Price Notes
IronPeak 100 ft Roofline Kit — RGBW Permanent Lighting $1,299 One face of a larger home, or a smaller single-story
IronPeak 150 ft Roofline Kit — RGBW Permanent Lighting $1,762.50 Most single-story homes
IronPeak 200 ft Roofline Kit — RGBW Permanent Lighting $2,399 Two-story front plus a side, two peaks included
IronPeak 300 ft Full-Perimeter Roofline Kit — RGBW Permanent Lighting $3,499 Full perimeter, three peaks included
IronPeak 25 ft Add-On Kit (No Power Supply) $299 Extends a kit off its existing power supply — no second controller
IronPeak 50 ft Add-On Kit (No Power Supply) $499 Extends a kit off its existing power supply — no second controller

Every roofline kit includes the aluminum track, RGBW strands, the pitch-matched TrueCenter Apex Track peak, a 600 W power supply, the 4-zone controller, color-matched hardware and the install guide. Roof pitch (4/12, 6/12, 9/12, 12/12) and track color are chosen at checkout.

What the whole job runs — so the kit price isn't the whole story

I don't set Dan's price. I do publish what the market does, and I'd rather you see it here than be surprised by it on a quote.

Professionally installed permanent Christmas lights run $20–$40 per linear foot in 2026, with most quotes between $25 and $35, and an average home with 100–150 feet of front roofline landing around $3,000–$5,000 installed. Source: IronPeak Field Guide — Permanent Christmas Lights Cost Per Foot (2026), which cites HomeGuide 2026 for the $20–$40 per foot range, fetched September 7, 2026.

The kit above is the material part of that number. The rest is labor, ladders, insurance, the time to measure and lay out your roofline, and somebody standing behind the work once it's on your house. A quote well above the kit price is not a markup on parts — it's the part of the job I can't do from Syracuse.

What the installer adds, and why I don't quote it

Labor. Dan measures your roofline, picks the pitch and color, mounts the track, and stands behind the work on your roof. That price depends on your house — stories, gables, access, how many peaks — and he sets it, not me. The range above is a national figure, not a Syracuse one. I print it so a quote doesn't surprise you, not to tell Dan what to charge.

Who installs it here

Nobody paid to be on this page. Dan runs First Due Home Services out of Clay, about ten miles north of the city. He's here because he bought the track, not because he bought a spot. He hasn't published a service area, so the towns below are mine, set by distance — not his words dressed up as a claim.

Your Syracuse installer

First Due Home Services

Dan Mulhern, owner · based in Clay, NY
www.facebook.com/FDPowerWashing

Service area: Syracuse and the Onondaga County towns around it — DeWitt, Liverpool, North Syracuse, Fayetteville, Camillus, Cicero, Manlius, Clay, Baldwinsville. Service area set by IronPeak from straight-line distance to Syracuse; Dan is based in Clay, about ten miles north. He hasn't published a service area and hasn't confirmed this list. If your town isn't listed, send the form anyway — a New York ZIP still reaches him through me.

Send the form below and it comes to me first; I pass it to Dan myself. Request a quote from Dan

Syracuse's population is 146,091 (American Community Survey 2024 1-year estimate). Source: U.S. Census Bureau ACS 2024 1-year (table B01003) via Census Reporter API (geo 16000US3673000), fetched September 11, 2026.

First Due Home Services is based in Clay, 10.0 miles from Syracuse. Source: OpenStreetMap Nominatim geocoder; great-circle distance computed from returned coordinates, fetched September 11, 2026.

Request a quote from First Due Home Services

Right now your request comes to me first, and I pass it to Dan at First Due Home Services myself. If you haven't heard from Dan within 2 business days, email me at devan@ironpeaklighting.com and I'll chase it myself.

Your details go to your installer and to me, and to nobody else. I also record how you arrived — the ad or search, the page you landed on, the referring site and the time of your first visit — so I know what is working. I don't sell your details and I won't put you on a mailing list — privacy policy. If the send fails you'll see it on this page, along with an email address that reaches me directly.

Why the peak looks right — and how it goes on a Syracuse roofline

Most systems start at the gutter and work up, so spacing errors pile up at the peak — the one spot everyone looks at from the street. The TrueCenter Apex Track is a one-piece, pitch-matched peak that goes on first, so the lights center on your ridge and the run works outward symmetrically. It's patent-pending, it ships in your track color, and it goes up in under 5 minutes instead of 25-plus minutes of cutting on a ladder.

  1. Measure and quote. Dan measures the roofline, matches the track color to your fascia and soffit, and quotes labor on top of the kit price above.
  2. Peak first. The Apex Track matched to your pitch — 4/12, 6/12, 9/12 or 12/12 — is fastened at the ridge with its center node dead on the apex. Under 5 minutes.
  3. Track outward. 1-meter sections of 6063-T6 aluminum are screwed to the fascia both directions from the peak. Strands plug together with factory-terminated waterproof connectors — no cutting, no splicing on the roof.
  4. One box, one power connection. The 600 W supply and 4-zone controller share one enclosure. The app goes on your phone and the schedule gets set for Syracuse, not a factory default.

30-Day Perfect Peak Guarantee — From our product pages: “If any Apex peak doesn't sit true and symmetrical out of the box, we replace it free and cover the shipping — no hassle.”

What you control from your phone

One controller, four independent zones, an app on your phone. That matters here, because the dark starts before five and stays.

  • Colors. RGBW nodes — red, green, blue and a true 2800K warm white — so Christmas is Christmas and the rest of the year the house reads as plain warm white, or off.
  • Zones. Four independent outputs with their own node counts and animations; the front can run a scene while the back stays white.
  • Schedules and scenes. Timers, presets and saved scenes over WiFi or Bluetooth. Tap once for Thanksgiving, once more for game day.
  • Brightness. Dimmable. I don't publish a brightness rating; ask Dan to show you a lit house instead.

Set the on-time for Syracuse's own sunset, because it comes early here in December:

Syracuse sunset is 4:32 p.m. on December 1 and 4:34 p.m. on December 21. Source: sunrise-sunset.org solar calculator, fetched September 11, 2026.

Built for Syracuse weather

Thirty-odd inches of snow a month in deep winter is not a decorating problem. It is the reason a permanently mounted track beats clips you handle twice a year.

Syracuse's normal December brings 30.6 inches of snow and January 34.0, on 3.28 and 2.58 inches of total precipitation (1991-2020 normals). Source: NOAA NCEI 1991-2020 Normals (station USW00014771), fetched September 11, 2026.

Syracuse has 69,639 housing units, 40.3% of them single-family detached; the median owner-occupied home is worth $158,100 and the median home was built in 1949 (ACS 2024 1-year). Source: U.S. Census Bureau ACS 2024 1-year (B25001, B25024, B25035, B25077) via Census Reporter API, fetched September 11, 2026.

What that means for the hardware

  • Water: every LED node is encapsulated in UV-stabilized polyurethane, which flexes through freeze-thaw instead of cracking like epoxy, and every connector is factory-terminated and waterproof — zero field splices, so there is no gel-filled joint to fail in a wet December.
  • Power: the whole run is low-voltage 24 V DC from one 600 W supply with multi-layer surge protection built in.
  • Wind: the 6063-T6 aluminum track is screwed to the fascia, not clipped or glued, and the wire is 18 AWG UV-resistant three-conductor — heavier than the 20 AWG most systems ship.
  • Sun: The track is up through Syracuse's summer too; the UV-stabilized encapsulation and the powder-coated track are there for July as much as for December.

What it looks like in daylight

You see the track, not the lights. It sits under the roofline in 1-meter powder-coated sections and comes in four colors so it matches the fascia or soffit instead of announcing itself.

The four IronPeak aluminum track colors side by side — matte black, white, oyster white and brown — the only part of the system visible in daylight.
  • Matte Black — dark trim.
  • White — white fascia and vinyl soffit.
  • Oyster White — cream and off-white trim.
  • Brown — brown fascia, cedar and darker brick.

Dan picks the color against your trim at the quote. Availability varies by color and pitch, so decide early.

When Syracuse expects the lights on

The season here has a hard edge, and it comes with snow. Frost alone doesn't stop an install, but ice on the roof edge does.

Syracuse's normal December is a 37.1°F high and 23.7°F low, and January is 31.7°F/16.5°F (1991-2020 normals at Syracuse Hancock Intl Ap). Source: NOAA NCEI 1991-2020 U.S. Climate Normals (station USW00014771, SYRACUSE HANCOCK INTL AP, NY US), fetched September 11, 2026.

Syracuse averages 25.0 December nights and 27.7 January nights at or below 32°F (1991-2020 normals). Source: NOAA NCEI 1991-2020 Normals (MLY-TMIN-AVGNDS-LSTH032, station USW00014771), fetched September 11, 2026.

So the honest booking advice here is early autumn, before the snow settles in for the winter.

What to hand your HOA

If you are in an association, your recorded covenants govern your exterior — read them before you order. That document decides, not me.

If you do need approval, get the request in before the install date, not after. What to attach:

  • The track color you're using, against a photo of your trim (the four colors are above).
  • One sentence that the fixture is a low-profile aluminum track mounted under the roofline, with no exposed bulbs or wire.
  • Your schedule: what hours it runs, and that outside the holidays it's warm white or off.

What it adds to your power bill

Two competitors print a monthly dollar figure with no source. Here is the arithmetic so you can check mine.

kWh per month = nodes × 0.96 W ÷ 1000 × hours per night × nights. 0.96 W is the maximum draw per node from my spec sheet; a node is one puck, spaced one per foot.

Example: a 100 ft kit carries 100 nodes. 100 × 0.96 W = 96 W. Six hours a night for a month: 0.096 kW × 180 h = 17.28 kWh. At New York's June 2026 average residential price of 29.49 cents a kilowatt hour that is about $5.10 a month — at full white, every node, every night. Colors and dimming draw less; your actual tariff and riders may differ.

New York homes paid an average of 29.49 cents per kilowatt hour for electricity in June 2026 (EIA). Source: U.S. Energy Information Administration, Electric Power Monthly Table 5.6.A (residential, June 2026), fetched September 11, 2026.

The one maintenance task

Nothing comes down in January and nothing goes in the attic. The one job left is a rinse when the winter grime washes off — from the ground, with a hose.

Start with the front, add the rest later

The controller has four independent zones. I'd start with zones 1 and 2 on the front roofline and add the gables, sides or the second story on zones 3 and 4 later — even a year later — with a 25 ft add-on ($299) or a 50 ft add-on ($499). Same power supply, same controller, nothing re-mapped. The add-on is the same track and the same nodes at the same spacing, so the join is invisible.

The warranty, word for word

From our product pages:

30-Day Perfect Peak Guarantee — “If any Apex peak doesn't sit true and symmetrical out of the box, we replace it free and cover the shipping — no hassle.”

5-Year Product Warranty — “The components — LED strands, controller, and power supply — are covered against product defects for 5 years from purchase. (Normal weather wear-and-tear isn't a defect and isn't covered.)”

First-order money-back — “Your first 100 ft kit is backed by a 30-day money-back guarantee — return the material and your refund comes back as cash.”

The refund structure — what comes back as cash and what comes back as store credit — is on the returns and guarantee page, in full, rather than paraphrased here. Labor on your roof is First Due Home Services' to stand behind; the product is mine.

Syracuse-area towns

Dan hasn't published a service area, so this list is mine — Onondaga County towns near Syracuse. North Syracuse sits mostly inside the Town of Clay, where he is based.

From Syracuse: DeWitt 4.2, Liverpool 5.4, North Syracuse 6.1, Fayetteville 7.3, Camillus 7.9, Cicero 8.9 miles. Source: OpenStreetMap Nominatim geocoder; great-circle distances computed from returned coordinates, fetched September 11, 2026.

  • DeWittOnondaga County — request goes to Dan through me
  • LiverpoolOnondaga County — request goes to Dan through me
  • North SyracuseOnondaga County — request goes to Dan through me
  • FayettevilleOnondaga County — request goes to Dan through me
  • CamillusOnondaga County — request goes to Dan through me
  • CiceroOnondaga County — request goes to Dan through me
  • ManliusOnondaga County — request goes to Dan through me
  • ClayOnondaga County — request goes to Dan through me
  • BaldwinsvilleOnondaga County — request goes to Dan through me

These towns are mine, set by distance from Syracuse. Dan hasn't published a service area of his own, and the page says so. Towns outside this list still route to Dan through me when the ZIP is in New York; he confirms coverage on the call.

Questions Syracuse homeowners ask

How much do permanent Christmas lights cost in Syracuse?

Nationally, installed permanent Christmas lights run $20–$40 per linear foot in 2026 — most quotes land $25–$35, and an average home with 100–150 ft of front roofline runs about $3,000–$5,000. I don't have a Syracuse-only figure. The material inside that is public: a 100 ft IronPeak kit is $1,299, 150 ft $1,762.50, 200 ft $2,399, 300 ft $3,499. Labor is the installer's to quote.

Who installs IronPeak permanent lights in Syracuse?

First Due Home Services, run by Dan Mulhern out of Clay. Send the form on this page and it comes to me first; I pass it to Dan myself. I don't sell your details and I won't put you on a mailing list.

Will it survive a Syracuse winter?

Syracuse averages 25.0 December nights and 27.7 January nights at or below freezing, with about 30.6 inches of snow in December and 34.0 in January (1991–2020 normals). The track is 6063-T6 aluminum screwed to the fascia and the run is sealed, so nothing needs taking down or putting back up in that.

When can you install?

Before the snow settles in. Early autumn is the honest advice here — once the run of freezing, snowy nights starts, an install can end up waiting for a break in the weather.

How long is the wait, and how many people are ahead of me?

There is no queue on my side. With First Due Home Services live, Syracuse requests come to me and I pass them to Dan myself, not onto a list. The wait is his to quote, not mine. If your ZIP is outside New York you join a waiting list for your area instead.

Will I see the track in the daytime?

You see a slim aluminum line along the fascia, in the color you pick — Matte Black, White, Oyster White or Brown. Matched to the fascia board it reads as trim. The diodes sit inside the channel, so you do not see bulbs or cord in daylight.

What does it add to my power bill?

Each node draws at most 0.96 W. A 100 ft kit carries 100 nodes, so about 96 W at full white; six hours a night for a month is 17.3 kWh. At New York's June 2026 average residential price of 29.49 cents a kilowatt hour that is roughly $5.10 a month. Colors and dimming draw less.

Can I light the front now and add the sides later?

Yes. Add-on runs are $299 for 25 ft and $499 for 50 ft, without a power supply, because they run off the one you already have.

What does the warranty actually say?

Word for word, from my product pages. 30-Day Perfect Peak Guarantee: "If any Apex peak doesn't sit true and symmetrical out of the box, we replace it free and cover the shipping — no hassle." 5-Year Product Warranty: "The components — LED strands, controller, and power supply — are covered against product defects for 5 years from purchase. (Normal weather wear-and-tear isn't a defect and isn't covered.)"

Read enough? Request a quote from First Due Home Services

Last updated September 12, 2026 · prices checked September 12, 2026.

Find an installer in another city · Install lights for a living? The dealer program costs $0 to join.